Product Description
Servo Driver HAT
Features:
- Based on Raspberry Pi 40PIN GPIO interface design, it is suitable for Raspberry Pi series motherboards and Jetson Nano.
- I2C interface control, only 2 signal lines are needed to drive the steering gear.
- Support up to 16 servo or PWM outputs with 12-bit resolution (4096 level) for each channel.
- On-board 5V voltage-stabilizing chip, which can output 3A current, can be connected to the battery for power supply through VIN terminal.
- Standard onboard steering gear interface, which can be connected to SG90, MG90S, MG996R and other common steering gears.
- I2C control interface is reserved for easy access to other main control boards.
Parameter
- Power supply: 5V (raspberry pie connector) or 6V~12V(VIN terminal)
- Logic voltage: 3.3V
- Steering gear voltage: 5V
- Driver chip: PCA 9685
- Interface: I2C
- Diameter of via hole: 3.0mm
- Product size: 65× 30mm
- Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
Power Over Ethernet HAT (F) For Raspberry Pi 5, High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard$18.99 or 2280 BeansRedeem Now
-
PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard$6.99 or 840 BeansRedeem Now
-
-
-
-
-
-
RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$4.89 or 590 BeansRedeem Now
-
RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$4.39 or 520 BeansRedeem Now
-
RP2040-GEEK Development Board, Based On RP2040 Microcontroller, With 1.14inch 65K Color LCD$9.89 or 1200 BeansRedeem Now
-
-
-
-