M5Stack ESP32 Wi-Fi Camera
Product description
Timer Camera X is a camera module based on ESP32, which integrates ESP32 chip and carries 8M PSRAM on board. It adopts a 3 megapixel camera (OV3660) with a viewing angle of 66.5°, and can take photos with a resolution of 1600 x 1200 at the highest. It has a built-in 140mAh battery and LED status indicator, and a hidden reset button under the indicator. The camera is mainly designed for ultra-low power consumption. Timed sleep and wake-up can be realized through RTC(BM8563). After sleep, the current is only 2 μ A. After the camera is turned on to take regular photos (one photo per hour), the battery can support continuous operation for more than one month. The module supports WiFi image transmission and USB port debugging, and the bottom HY2.0-4P port outputs, which can be connected with other peripherals. With M5Burner burning firmware, you can directly use Camera-Tool to set Timer Camera X, and you can also process Timer Camera X data in UIFlow.
Product characteristics
- ESP32 based design.
- WIFI image transmission.
- Timed sleep wake-up
- status indicator lamp
- Ultra low power design.
- Built-in 140mAh battery.
- Programming platform: ESP-IDF/Arduino/UIFlow.
Part list:
- Timer Camera X x1
- LEGO Adapter x1
- Wall-1515 x1
- Type-C USB(20cm) x1
- Comments(0)
You might like
-
-
PCBWay MPU-6050 Module 6DOF Three-Axis Accelerometer Gyroscope Module GY-521$1.99 or 240 BeansRedeem Now
-
-
-
-
-
-
-
-
Sound sensor module (voice control switch, audio detection/analog + digital)$6.00 or 720 BeansRedeem Now
-
-
-
-
-
-
-
Microphone Module I2S Interface Inmp441 Mems High Precision Low Power Ultra Small Volume$5.00 or 500 BeansRedeem Now
-