Necroware's Silly Sound Bastard Longboard
ORIGINAL GITHUB: https://github.com/necroware/silly-sound-bastard
¿Want a Case?
PCBWay: https://www.pcbway.com/project/shareproject/Silly_Sound_Bastard_3D_Case_Large_Version_74fa0bcf.html
Cults3D: https://cults3d.com/es/modelo-3d/herramientas/silly-sound-bastard-large-ver
There are 2 versions of this project on PCBWay, but both are shortboard. Here I leave the Longboard.
It is yet another clone of the well known Covox Speech Thing. I wanted to get some practice in EDA and what is one of the simplest part to make, which you could have fun with? If you are in retro community, you would understand, why it was a Covox clone.
What is special about it?
Well, it is still a simple Covox clone. However, I wanted to make something brute, what you can solder easily, using some through holes parts, but still with some space for experiments. So I made it with a quad switch, three of which can be used to control bypass capacitors, to play with low-pass filtering and one for switching between mono and (fake-)stereo sound.
How does it sound?
I made a video on my Youtube chanel about this Covox clone.
Bill of materials
I have a good news for someone, who is especially keen to solder. Instead of using two types of resistors with 1/2 relation, I just used all the same types, but doubbled one row to maintain the relation. This way you don't need to search for resistors with a proper 1/2 relation, but just can take any resistors, you have at hand. The parallel port connector is not a through hole part, but rather a normal connector, like used in any printer cable. It is quite easy to find and can be directly soldered to the edge of the PCB.
PartCountRemarksR1..R2626x7.5kOhm resistorC11x0.01uF tantalum capacitorC21x0.1uF tantalum capacitorC31x1.0uF tantalum capacitorC41x1.0uF electrolytic capacitorSW11xQuad-Switch (like LCSC C559139)AUDIO11x3,5mm Audio jack port (like LCSC C145816)LPT1xDB25 parallel port M-plug
There is a long and a short variants?
Yes, I actually made two variants. The long board has switches, variable low pass filtering and uses three rows of same resistors. If you are not interested in all of that, you have a set of two types of resistors with a proper 1/2 relation and space is more important for you, then take the short variant. You will need less parts and get a more compact solution.
PartCountRemarksR1..R8,R179x15kOhm resistorR9..R168x7.5kOhm resistorC11x0.1uF electrolytic capacitorC21x1uF tantalum or electrolytic capacitorAUDIO11x3,5mm Audio jack port (like LCSC C18166)LPT1xDB25 parallel port M-plug
How did I make it?
I used EasyEDA to create this PCBs. If you want to derive from this work, you can find all the files in the project subfolders of the boards. To order the parts I used LCSC.
Possible modifications
It is reasonable to play around with another resistors and filter capacitors. The higher the resistors value, the less noise you will get through the parallel port. However, this also would mean less power on the audio output and necessity of an amplifier. If you want to use passive headphones, try to go with lower resistance. I used 1kOhm (and 2kOhm) resistors and the audio quality was still quite good. Also the low pass filter capacitors are variable. It depends very much on the speakers, what's the best, but I found, that it's not worth it to go over 1uF. Even then, filtering starts to be very aggressive. The higher resitor values you take, the lower capacitor values you should need.
Links
Some theory by Eugeny Brychkov
Necroware's Silly Sound Bastard Longboard
*PCBWay community is a shared platform and we are not responsible for any design issues.
- Comments(0)
- Likes(3)
-
Engineer Aug 04,2023
-
astrodoggie Jul 12,2023
-
Matthew Schultz Jul 07,2023
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Nicolas The Wizard
-
SNES2ATARI V2 for Atari 7800 GITHUB: https://github.com/nsinav/SNES2AtariThis is a working project. Games must be specifically co...
-
Atari 7800 - A78 Super Cart (Work in Progress) ORIGINAL GITHUB: https://github.com/tdididit/a78-supercart
-
Atari 7800 - A78 Simple Cart Original GITHUB: https://github.com/tdididit/a78-simplecart
-
Atari 7800 - A78 SD Cart Original GITHUB: https://github.com/tdididit/a78-sdcart
-
Atari 7800 - A78 Flashcart Plus Original GITHUB: https://github.com/tdididit/a78-flashcartplus
-
Atari 7800 - A78 Flashcart Original GITHUB: https://github.com/tdididit/a78-flashcart
-
Necroware's XT Prototyping Board Original GITHUB: https://github.com/necroware/xt-prototyping-board
-
Necroware's MCE Adapter 02/2024 rev. GITHUB: https://github.com/necroware/mce-adapterYoutube Video: https://www.youtube.com/watch?v=f9ryi...
-
Colecovision 8K/16K/24K/32K Cartridge Features:Create 8K, 16K, 24K and 32K Cartridge games for the Colecovision system.Uses easily availab...
-
Atari 5200 16K/32K Cartridge Features:Create 16K and 32K Cartridge games for the Atari 5200 system.Uses easily available, off-the...
-
Atari 2600 64K Bankswitch Cartridge Features:Create 64K Cartridge games for the Atari 2600 system.Supports standard Atari F2 (64k) banks...
-
Atari 2600 8K / 16K / 32K Activision Bankswitch Cartridge Features:Create 8K, 16K and 32K Cartridge games for the Atari 2600 system.Supports standard Atari F8...
-
Atari 2600 8K / 16K / 32K Bankswitch Cartridge Features:Create 8K, 16K and 32K Cartridge games for the Atari 2600 system.Supports standard Atari F8...
-
Atari 2600 2K / 4K Activision Cartridge ORIGINAL WEBSITE: https://grandideastudio.com/portfolio/gaming/pixels-past/Features:Supports 2K and ...
-
Atari 2600 2K / 4K Classic Cartridge ORIGINAL WEBSITE: https://grandideastudio.com/portfolio/gaming/pixels-past/Features:Supports 2K and ...
-
A8 Pico Cart v1.0 3D Case A8 Pico Cart v1.0 3D CaseOriginal GITHUB: https://github.com/robinhedwards/A8PicoCart
-
A8 Pico Cart v1.0 - XL/XE Version (Fits Case v1.0) A8 Pico Cart v1.0 - XL/XE Version (Fits Case v1.0)Original GITHUB: https://github.com/robinhedwards/...
-
Pico Cart 64 v1 Lite ORIGINAL GITHUB: https://github.com/kbeckmann/PicoCart64SRAM chip supporting ROMs up to 64MB, a WiFi...
-
IoT Indoor system with ESP32 to monitor Temperature, Humidity, Pressure, and Air Quality
285 0 1 -
Naruto Multi-color PCB printed with UV technology
113 2 1 -
-
-
-
-