Product Description
TP4056 Micro USB 5V 1A 18650 Lithium Battery Charger Module 2 in 1 Charging Board with Overcurrent Protection
Descriptions:
Input port with micro 5pin USB female, can directly use mobile charger for input to the lithium battery,and still retain the input voltage wiring solder joints, can be very convenient.
Connect the battery to B + B - , insert mobile phone charger to the USB Female then red light is charging and green is full of charged.
The input voltage: 5V
Maximum charging current: 1000 mA
Charge cut-off voltage: 4.2 V + / - 1%
The battery overcharge protection voltage: 2.5 V
Battery over-current protection current: 3 A
Input interface: micro USB
Size:2.6 x 1.7 cm
- Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
-
-15%PCBWay Single-Channel Relay Module with Delayed Power-off, Triggered Delay, and Cyclical Timing Circuit Switch$1.69 or 200 BeansRedeem Now
-
-
Four Way Holder V3 Development Board(Compatible with Raspberry Pi/STM32)$8.99 or 1080 BeansRedeem Now
-
-50%1 Channel Relay Module 5V with optocoupler Support High and Low Level Trigger$0.99 or 120 BeansRedeem Now
-
Relay Module Interface Boards for Arduino Low Level Trigger 5V 2 Channels$2.00 or 200 BeansRedeem Now
-
-
LM2596S DC-DC 3A Buck Adjustable Step-down Power Supply Converter Module$0.99 or 120 BeansRedeem Now
-
-
-
-
-
Step-Down & Step-Up Converter DC-DC 1.8V-5V 3V 3.7V to 3.3V Power Module$1.00 or 100 BeansRedeem Now
-
USB isolator/USB to USB isolator digital signal audio power isolator ADuM3160$9.99 or 1200 BeansRedeem Now
-
-
-
Dual 18650 Battery Holder V3 Development Board(Compatible with Raspberry Pi/STM32)$4.99 or 600 BeansRedeem Now