Particle Boron LTE CAT-M1
Description:
The Boron LTE is a powerful LTE CAT-M1 enabled development board that can act as a standalone cellular endpoint. It is based on the Nordic nRF52840 and has built-in battery charging circuitry so it’s easy to connect a Li-Po and deploy your local network in minutes.
The Boron LTE CAT-M1 (NorAm) or BRN402 features the same form factor as the rest of the Particle’s Boron series modules and comes with a full set of regulatory and industry certifications to dramatically accelerate time to market. The BRN402 is certified only for use with the Taoglas Cellular Flex Antenna 2G/3G/LTE 5dBi.
Please note: Use of a different antenna with the above module may violate regulatory certifications and require additional certification. Refer to our antenna documentation for additional information regarding regulatory compliance and certification of Particle modules.
Contents:
- Boron LTE development board (On-board SIM, no card necessary)
- Cellular flex antenna
Specs:
- u-blox SARA R410 LTE modem
-LTE CAT M1 module with global hardware support (MVNO support for US only)
-3GPP Release 13 LTE Cat M1
- Nordic Semiconductor nRF52840 SoC
-ARM Cortex-M4F 32-bit processor @ 64MHz
-1MB flash, 256KB RAM
-IEEE 802.15.4-2006: 250 Kbps
-Bluetooth 5: 2 Mbps, 1 Mbps, 500 Kbps, 125 Kbps
-Supports DSP instructions, HW accelerated Floating Point Unit (FPU) calculations
-ARM TrustZone CryptoCell-310 Cryptographic and security module
-Up to +8 dBm TX power (down to -20 dBm in 4 dB steps)
-NFC-A tag
- On-board additional 4MB SPI flash
- 20 mixed signal GPIO (6 x Analog, 8 x PWM), UART, I2C, SPI
- Micro USB 2.0 full speed (12 Mbps)
- Integrated Li-Po charging and battery connector
- JTAG (SWD) Connector
- RGB status LED
- Reset and Mode buttons
- Dual SIM support: Nano 4FF (unpopulated) and MFF2
- U.FL connector for external antenna
- Meets the Feather specification in dimensions and pinout
- FCC and PTCRB certified
- RoHS compliant (lead-free)
- Comments(0)
You might like
-
LILYGO T4-S3 ESP32-S3 2.41-inch AMOLED Touch Display Development Board RGB Screen Dual-Core LX7 Microprocessor WIFI Bluetooth$56.89 or 6850 BeansRedeem Now
-
YS-AM100 Bluetooth amplifier board high-power KTV microphone audio integrated machine 2.1 channel TPA3116D2$25.00 or 3000 BeansRedeem Now
-
YS-AS21 Bluetooth digital amplifier board module TPA3251 high and low tone adjustment subwoofer 220W x 2 + 350W$29.99 or 3600 BeansRedeem Now
-
ZK-502L module 5.0 Bluetooth 2*50W digital amplifier board HIFI fever high power 2.0 stereo sound enhancement$3.99 or 480 BeansRedeem Now
-
ZK-HT21 Bluetooth Digital Amplifier Module 2.1 Channel with TDA7498E, Bass/Treble Adjustment, Subwoofer Output$25.00 or 3000 BeansRedeem Now
-
ZK-502MT 2.0 Stereo Bluetooth Audio Digital HIFI Amplifier Board Module with 50W*2 High/Low Tone Adjustment$5.99 or 720 BeansRedeem Now
-
-
PCBWay Wireless Module with SI24R1 RF Communication Wireless Module for Data Transmission$1.99 or 240 BeansRedeem Now
-
-
-
ESP32 WiFi Bluetooth Dual-mode Communication Development Board With Camera$9.99 or 1200 BeansRedeem Now
-
-
-
-
-
-
-
ZK-1002M MINI 2.0 Stereo Bluetooth Digital Amplifier Board Module Multiple Inputs 100W*2$7.99 or 960 BeansRedeem Now