Product Description
Full-color LED Expansion Board 4×8 RGB LED
Introduction:
RGB LED expansion board designed for Raspberry pi can be programmed and controlled by a signal line to display color pictures.
Features:
- Compatible and can be directly inserted into any version of Raspberry pi.
- On-board 4 × 8 RGB LED(WS2812B)
- Different pins of raspberry pie can be selected for control by 0 ohm resistor.
- Lead out the control pin, which is convenient to be controlled by other single-chip computers.
Parameter:
- Operating voltage: 5V
- Brightness: 256-level adjustable
- Color depth: 24 bits (8 bits for R/G/B, 256x256x256=16777216 colors can be combined)
- Data transmission speed: 800Kbps(typ)
- Product size: 65mm × 30.2mm
- Diameter of fixing hole: 3.0mm
Interface description:
Take accessing other MCU as an example:
5V: connected to 5V power supply
GND: connect to GND
DIN: signal input terminal
DOUT: signal output (optional)
- Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
-
-
-
-
-
LED aluminum substrate 1w 3w 5w lamp bead universal high power heat sink$0.20 or 20 BeansRedeem Now
-
-
Mini Traffic Light 5V LED Display Module Red Green Yellow Light for Arduino Raspberry Pi$1.00 or 100 BeansRedeem Now
-
-
-
4-digit 8-segment Display Module for Raspberry Pi Pico, SPI-compatible$3.99 or 480 BeansRedeem Now
-
-
-
WS2812 Digital RGB LED Strip, High brightness, Energy-saving And Low power consumption, Cuttable and Programmable$4.99 or 600 BeansRedeem Now
-
Electronic Clock for Raspberry Pi Pico, Accurate RTC, Multi Functions, LED Digits$23.99 or 2880 BeansRedeem Now
-
RGB Full-Color LED Matrix Panel, 3mm Pitch, 64×32 Pixels, Adjustable Brightness$21.99 or 2640 BeansRedeem Now
-
-